0120
TM 1-1740-221-13&P&P
DASH PANEL - (CONTINUED)
Figure 3. Accessory Components (Located Behind Dash Panel)
TRANSMISSION CIRCUIT FUSE (20 AMP)
1. Install 20-amp fuse (Figure 3, Item 3) in fuse holder (Figure 3, Item 2).
2. Install fuse boot cover (Figure 3, Item 1).
3. Close dash panel.
4. Connect battery negative cables (WP 0111).
5. Perform Maintenance Operation Check.
RECTIFIER DIODE, PARK BRAKE ENGAGE (REC2)
1. Install diode REC2 (Figure 3, Item 4) in diode holder (Figure 3, Item 5).
2. Close Ooperator dash panel.
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
RECTIFIER DIODE, REVERSE (BACKUP) LIGHT (REC1)
1. Connect diode REC1 (Figure 3, Item 6) to wiring harness by connecting solder less quick disconnects..
2. Close dash panel.
01209