0121
TM 1-1740-221-13&P&P
ELECTRIC PANEL (DASH) - (CONTINUED)
4.
Install washer and nut (Figure 1, Item 6) and tighten.
5.
Install 2 wires (Figure 1, Item 3) on relay.
6.
Install 2 nuts on the relay terminal (Figure 1, Item 16) and tighten.
7.
Install 2 wires (Figure 1, Item 2).
8.
Install washer and nut (Figure 1, Item 1) and tighten.
9.
Close dash panel (WP 0120).
10.
Connect battery negative cables (WP 0111).
11.
Perform Maintenance Operation Check.
TIME DELAY RELAY (TRD)
1. Position Time Delay Relay (Figure 1, Item 14) and plug into socket by pushing on top of relay.
2. Adjust time range selector to the D position, MIN/MAX rheostat to the second position from MIN.
3. Close dash panel (WP 0120).
4. Connect battery negative cables (WP 0111).
5. Perform Maintenance Operation Check.
PARK POSITION BRAKE ENGAGE RELAY (CRP)
1. Slide CRP relay (Figure 1, Item 13) on its tang mount by pushing forward while gently wiggling relay side
to side.
2. Install wiring connector (Figure 1, Item 12) on CRP Relay.
3. Close dash panel (WP 0120).
4. Connect battery negative cables (WP 0111).
5. Perform Maintenance Operation Check.
PARK POSITION BRAKE DISENGAGE RELAY (CRR)
1. Slide CRR relay (Figure 1, Item 10) on its tang mount by pushing forward while gently wiggling relay side
to side.
2. Install wiring connector (Figure 1, Item 11) on CRR Relay.
3. Close dash panel (WP 0120).
4. Connect battery negative cables (WP 0111).
5. Perform Maintenance Operation Check.
CAPACITOR (SERVICE BRAKE SYSTEM FAIL) (CAP-1)
1. Install capacitor (Figure 1, Item 8) with positive lead in the top position.
2. Tighten 2 set screws (Figure 1, Item 7).
3. Close dash panel (WP 0120).
4. Connect battery negative cables (WP 0111).
5. Perform Maintenance Operation Check.
ACCESSORY FUSES
1. Push appropriate fuse (Figure 1, Item 9A, B, C, D, E and F) into fuse holder
2. Close dash panel (WP 0120).
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
01214