TM 1-1270-476-30
4-171
4-12. DAY SENSOR SUBASSEMBLY REPAIR (cont)
1. ANGULAR ACCELEROMETER A6
REPLACEMENT
NOTE
An alternate configuration exists and the
connector may be either P1 (alternate) or P8.
REMOVAL
a. Disconnect connector P8 or P1 (1).
b. Remove angular accelerometer A6 (2) by
removing four screws (3) and washers (4).
INSTALLATION
c. Install angular accelerometer A6 (2) using
four screws (3) and washers (4).
d. Connect connector P8 or P1 (1).
END OF TASK
