TM 1-1270-476-30
4-168
4-10. BRANCHED WIRING HARNESS ASSEMBLY (W10) OIP REPAIR (cont)
2. CONNECTOR P18 OR P19 REPLACEMENT
REMOVAL
a. Remove lacing and tying tape (1) securing
connectors P18 (2) and P19 (3) to circuit
card assembly A43.
b. Disconnect connectors as follows:
P18 (2) from A43J1 (4)
P19 (3) from A43J2 (5)
c. Remove connector P18 (2) or P19 (3) from
wires (para 2-5).
INSTALLATION
d. Install applicable replacement connector
P18 (2) or P19 (3) on wires (para 2-5).
e. Connect connectors as follows:
P18 (2) to A43J1 (4)
P19 (3) to A43J2 (5)
f. Install lacing and tying tape (1) to secure
connectors P18 (2) and P19 (3) to circuit
card assembly A43.
END OF TASK
