TM 1-1270-476-30
4-166
4-10. BRANCHED WIRING HARNESS ASSEMBLY (W10) OIP REPAIR
This task covers replacement of:
Para
Item
1.
Connector P11
2.
Connector P18 or P19
NOTE
For replacement of all other connectors, see
paragraph 4-9. Connectors P12 and P13 are
not used on this harness assembly.
INITIAL SETUP
Tools
Aircraft armament repairman tool set
Materials (appendix C)
Corrosion inhibitive sealing and coating
compound (Item 16)
Lacing and tying tape (Item 56)
Personnel Required
68J Aircraft Fire Control Repairer
CAUTION
While performing this procedure keep all
exposed lenses covered with lens paper to
prevent damage to coated optical surfaces.
NOTE
This figure is a phantom view of branched
wiring harness assembly W10 OIP laid over
the night sensor assembly. Only connectors
replaced in this paragraph are called out.
