TM 1-1270-476-30
4-164
4-9. BRANCHED WIRING HARNESS ASSEMBLY (W10) REPAIR (cont)
7. CONNECTOR P9 CONTACT
REPLACEMENT
REMOVAL
a. Disconnect connector P9 (1) from
connector A35J1 (2) by loosening two
screwlocks (3).
b. Remove faulty contacts connector P9 (1)
(para 2-5).
NOTE
Normally, only contacts are replaced. If
connector shell has to be replaced, retain two
screwlocks (3) from damaged shell for
installation on replacement shell.
INSTALLATION
c. Install replacement contacts in connector
P9 (1) (para 2-5).
d. Connect connector P9 (1) to connector
A35J1 (2) and tighten two screwlocks (3).
END OF TASK
