TM 1-1270-476-30
4-165
4-9. BRANCHED WIRING HARNESS ASSEMBLY (W10) REPAIR (cont)
8. CONNECTOR P10 CONTACT
REPLACEMENT
REMOVAL
a. Disconnect connector P10 (1) from
connector A36J1 (2) by loosening two
screwlocks (3).
b. Remove faulty contacts from connector P10
(1) (para 2-5).
NOTE
Normally, only contacts are replaced. If
connector shell has to be replaced, retain two
screwlocks (3) from damaged shell for
installation on replacement shell.
INSTALLATION
c. Install replacement contacts in connector
P10 (1) (para 2-5).
d. Connect connector P10 (1) to connector
A36J1 (2) and tighten two screwlocks (3).
END OF TASK
