0122
TM 1-1740-221-13&P&P
POWER DISTRIBUTION BLOCK (FUSE/RELAY HOLDER) - (CONTINUED)
3.
Install distribution box cover (Figure 2, Item 1).
4.
Connect battery negative cables (WP 0111).
5.
Perform Maintenance Operation Check.
PARK POSITION MOTOR CIRCUIT BREAKER (CB2)
1. Carefully push circuit breaker CB2 (Figure 2, Item 3) into the distribution box socket.
2. Install distribution box cover (Figure 2, Item 1).
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
FUEL HEATER FUSE (10FU)
1. Carefully push heater fuse (Figure 2, Item 4) into the distribution box socket.
2. Install distribution box cover (Figure 2, Item 1).
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
HEADLIGHT FUSE (12FU)
1. Carefully push headlight fuse (Figure 2, Item 5) into the distribution box socket.
2. Install distribution box cover (Figure 2, Item 1).
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
TAIL LIGHT FUSE (13FU)
1. Carefully push taillight fuse (Figure 2, Item 6) into the distribution box socket.
2. Install distribution box cover (Figure 2, Item 1).
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
HORN FUSE (11FU)
1. Carefully push horn fuse (Figure 1, Item 7) into the distribution box socket.
2. Install distribution box cover (Figure 2, Item 1).
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
PREHEAT FUSE (14FU)
1. Carefully push preheat fuse (Figure 2, Item 8) into the distribution box socket.
2. Install distribution box cover (Figure 2, Item 1).
3. Connect battery negative cables (WP 0111).
4. Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
01225/blank