• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 2. Power Distribution Block (Dash)
TAIL LIGHT FUSE (13FU)

Maintenance and Parts Manual For MT3 Standard Aircraft Towing System \(SATS\)
Page Navigation
  432    433    434    435    436  437  438    439    440    441    442  
img
. . . . . . . .
0122
TM 1-1740-221-13&P&P
POWER DISTRIBUTION BLOCK (FUSE/RELAY HOLDER) - (CONTINUED)
STARTER INTERLOCK RELAY (CRSI)
1.  Disconnect battery negative cables (WP 0111).
2.  Remove distribution box cover (Figure 2, Item 1).
3.  Locate Starter Interlock Relay (CRSI) (Figure 2, Item 2, Relay B) or reference decal inside distribution
box cover.
4.  Carefully pull relay from socket.
INTERLOCK RELAY (CRI)
1.  Disconnect battery negative cables (WP 0111).
2.  Remove distribution box cover (Figure 2, Item 1).
3.  Locate Interlock Relay (CRI) (Figure 2, Item 2, Relay C) or reference decal inside distribution box cover.
4.  Carefully pull relay from socket.
HAND BRAKE RELAY (CRHB)
1.  Disconnect battery negative cables (WP 0111).
2.  Remove distribution box cover (Figure 2, Item 1).
3.  Locate Hand brake Relay (CRHB) (Figure 2, Item 2, Relay D) or reference decal inside distribution box cover.
4.  Carefully pull relay from socket.
HAND BRAKE RELAY (CRHB)
1.  Line up Hand Brake Relay pins with distribution socket.
2.  Carefully push relay CRHB (Figure 2, Item 2, Relay D) into distribution box socket.
3.  Install distribution box cover (Figure 2, Item 1).
4.  Connect battery negative cables (WP 0111).
5.  Perform Maintenance Operation Check.
TRANSMISSION CIRCUIT RELAY (CRT)
1.  Disconnect battery negative cables (WP 0111).
2.  Remove distribution box cover (Figure 2, Item 1).
3.  Locate Transmission Circuit Relay (CRT) (Figure 2, Item 2, Relay E) or reference decal inside distribution
box cover.
4.  Carefully pull relay from socket.
PARK POSTITION MOTOR CIRCUIT BREAKER (CB2)
1.  Disconnect battery negative cables (WP 0111).
2.  Remove distribution box cover (Figure 2, Item 1).
3.  Locate CB2 (Figure 2, Item 3) or reference decal inside distribution box cover.
4.  Carefully pull circuit breaker from socket.
FUEL HEATER FUSE (10FU)
1.  Disconnect battery negative cables (WP 0111).
2.  Remove distribution box cover (Figure 2, Item 1).
3.  Locate heater fuse (Figure 2, Item 4) 10FU 25 Amp, or reference decal inside distribution box cover.
4.  Carefully pull fuse from socket.
HEADLIGHT FUSE (12FU)
1.  Disconnect battery negative cables (WP 0111).
01223


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.