0123
TM 1-1740-221-13&P&P
ELECTRIC PANEL (CENTER CONSOLE) - (CONTINUED)
5.
Connect battery negative cables (WP 0111).
6.
Perform Maintenance Operation Check.
7.
Install center console panel (WP 0028).
GLOW PLUG RELAY (CRGP)
1. Position glow plugs relay (Figure 1, Item 13).
2. Install 2 relay mount bolts (Figure 1, Item 11) and attaching hardware.
3. Install wires on glow plug relay (Figure 1, Item 13).
4. Install nuts (Figure 1, Item 10 and 12) and tighten.
5. Connect battery negative cables (WP 0111).
6. Perform Maintenance Operation Check.
7. Install center console panel (WP 0028).
STARTER (ENGINE) RELAY (SR)
1. Position starter relay (Figure 1, Item 13).
2. Install 2-starter relay mount bolts (Figure 1, Item 14) and attaching hardware.
3. Install wires on starter relay terminals.
4. Install washers and nuts (Figure 1, Item 15 and 16) and tighten.
5. Connect battery negative cables (WP 0111).
6. Perform Maintenance Operation Check.
7. Install center console panel (WP 0028).
END OF TASK
END OF WORK PACKAGE
01235/blank