TM 1-1740-221-13&P&P
FIELD MAINTENANCE
HEADLIGHT
INITIAL SETUP:
Test Equipment
Personnel Required
Multimeter (WP 0157, Item 14)
91B, Light Wheel Vehicle Mechanic
Tools and Special Tools
Equipment Condition
Engine Shut Down
General Mechanics Tool Kit (WP 0157, Item 24)
INSPECTION
NOTE
Headlight protective cover must be removed to perform proper inspection.
Visually inspect sealed headlight for cracks, loose connections, or condensation buildup in light. Replace as
necessary.
END OF TASK
REMOVAL
BULB REPLACEMENT
1. Remove four bolts (Figure 1, Item 1) and four nuts (Figure 1, Item 2) securing protective cover
(Figure 1, Item 3) to tow vehicle.
2. Disconnect connector (Figure 2, Item 4) from headlight (Figure 2, Item 2).
3. Remove defective light bulb (twist and pull) from headlight.
HEADLIGHT ASSEMBLY
Figure 1. Sealed Headlight Guard.
01131