0112
TM 1-1740-221-13&P&P
HARNESS - (CONTINUED)
Wire Terminal Lug Replacement
NOTE
Replace is the same for both types of wire terminal lugs.
WP0092F4
Figure 4. Sealed Connector Replacement.
1.
Cut off damaged terminal lug (Figure 4, Item 1).
2.
If necessary, slide heat shrinks tubing over wires (Figure 4, Item 3).
3.
Using wire stripper, strip enough insulation (Figure 4, Item 2) from wire (Figure 4, Item 3) to allow bare wire
to go all the way into hole in terminal lug.
4.
Select proper terminal lug (Figure 4, Item 1) for wire size and terminal.
5.
Insert bare end of wire (Figure 4, Item 3) all the way into terminal lug (Figure 4, Item 1).
6.
Crimp terminal lug (Figure 4, Item 1) to wire (Figure 4, Item 3). Ensure that connection is tight.
7.
If heat shrink tubing is used, slide tubing over connection and shrink in place.
END OF TASK
END OF WORK PACKAGE
01124
