0106
TM 1-1740-221-13&P&P
CREW PROTECTION SYSTEM (CPS) DOME LIGHT - (CONTINUED)
2.
Feed ground wire (Figure 1, Item 1) and CPS dome light power supply wire (Figure 1, Item 11) of CPS dome
light cover (Figure 1, Item 10) up through pass-through hole of CPS dome light ixture (Figure 1, Item 7).
3.
Install bolt (Figure 1, Item 8), nut (Figure 1, Item 2), and ground wire (Figure 1, Item 1) in aft end of CPS
dome light ixture (Figure 1, Item 7).
4.
Remove splice (Figure 1, Item 5) between CPS fan power supply wire (Figure 1, Item 4) and fan/dome light
power supply wire (Figure 1, Item 6).
5.
Splice CPS dome light power supply wire (Figure 1, Item 11) and CPS fan power supply wire (Figure 1, Item
4) to fan/dome light power supply wire (Figure 1, Item 6).
6.
Secure CPS dome light cover (Figure 1, Item 10) to CPS cab using two screws (Figure 1, Item 9).
Connect CPS wiring harness at steering plate (WP 0098, INSTALLATION, Step 7).
7.
8.
Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
01062