TM 1-1740-221-13&P&P
FIELD MAINTENANCE
WASHER FLUID RESERVOIR
INITIAL SETUP:
Tools and Special Tools
References
Tool Kit, General Mechanic (WP 0157, Item 24)
Personnel Required
Light Wheel Vehicle Mechanic91B - 1
INSPECTION OF INSTALLED ITEMS
Visibly inspect reservoir (Figure 1, Item 4) for mount secruity, connections, and leaks.
END OF TASK
REMOVAL
1. Disconnect washer luid reservoir power supply plug (Figure 1, Item 9) from receptacle (Figure 1, Item 6) on
reservoir (Figure 1, Item 4).
2. Remove two mount screws (Figure 1, Item 5).
3. Drain reservoir (Figure 1, Item 4) and remove washer supply tubing (Figure 1, Item 8) from hose barb
(Figure 1, Item 7) on reservoir (Figure 1, Item 4).
4. Remove reservoir (Figure 1, Item 4) and shim plate (Figure 1, Item 3) if applicable.
3
1
2
4
5
10
6
7
9
8
SATSCPS0079
Figure 1. Windshield Washer Reservoir
END OF TASK
01021