0062
TM 1-1740-221-13&P&P
COOLING FAN - (CONTINUED)
NOTE
Spinning the fan will be necessary to allow easier access to the fan mount bolts.
9. Remove four fan mount bolts (Figure 1, Item 8) (Bolts not shown).
10. Remove cooling fan (Figure 1, Item 7) from water pump pulley.
END OF TASK
INSTALLATION
1. Position cooling fan (Figure 1, Item 7) on water pump pulley.
NOTE
Spinning the fan will be necessary to allow easier access to the fan mount bolts.
2.
Install four fan mount bolts (Figure 1, Item 8) (Bolts not shown).
3.
Push radiator rearward back into position.
4.
Position bracket (Figure 1, Item 2) and spacer (Figure 1, Item 3).
5.
Install one bracket mount bolt (Figure 1, Item 4).
6.
Install two bracket mount bolts (Figure 1, Item 1).
7.
Adjust fan belt tension (WP 0041).
8.
Install brake reservoirs (WP 0083).
9.
Connect battery negative cables (WP 0111).
10.
Perform Maintenance Operation Check.
11.
Close engine cover (WP 0028).
END OF TASK
END OF WORK PACKAGE
00623/blank