0061
TM 1-1740-221-13&P&P
COOLANT TEMPERATURE SENDING UNIT (GAUGE) - (CONTINUED)
INSTALLATION
CAUTION
To avoid damage to coolant sending unit, do not over-tighten.
1.
Wrap threads of temperature sending unit (Figure 1, Item 1) with anti-seize tape.
2.
Install temperature sending unit (Figure 1, Item 1).
3.
Connect wiring lead (Figure 1, Item 4) and install nut onto temperature sending unit mount stud
(Figure 1, Item 1).
4.
Connect battery negative cables (WP 0111).
5.
Perform Maintenance Operation Check.
6.
Close engine cover and secure with rubber latches (WP 0028).
END OF TASK
END OF WORK PACKAGE
00613/blank