0061
TM 1-1740-221-13&P&P
COOLANT TEMPERATURE SENDING UNIT (GAUGE) - (CONTINUED)
REMOVAL
Figure 1. Temperature Sending Unit (Item 1) (Removal and Installation)
1.
Disconnect negative battery cables (WP 0111).
2.
Open engine cover (WP 0028).
NOTE
Label or tag all wiring terminals after removal to aid with reinstallation.
3.
Remove nut (Figure 1, Item 4) and wiring lead from temperature sending unit (Figure 1, Item 1) mount stud.
WARNING
To avoid personal injury, ensure engine is stopped and has cooled prior to removing coolant
sender unit.
NOTE
It may be necessary to drain radiator below the level of temp sender or excessive luid will drain.
4.
Remove temperature sending unit (Figure 1, Item 1).
END OF TASK
00612