0060
TM 1-1740-221-13&P&P
TEMPERATURE SWITCH (COOLANT) - (CONTINUED)
REMOVAL
Figure 1. Temperature Switch (Item 2) (Removal and Installation)
1.
Disconnect battery negative cable (WP 0111).
2.
Open engine cover (WP 0028).
NOTE
Label or tag all wiring terminals after removal to aid with reinstallation.
3.
Remove wiring lead (Figure 1, Item 3).
4.
Drain radiator (WP 0053) below the level of temp switch or excessive luid will drain.
WARNING
To avoid personal injury, ensure engine is stopped and has cooled prior to removing coolant
temp switch.
5.
Remove coolant temperature switch (Figure 1, Item 2).
END OF TASK
INSTALLATION
CAUTION
To avoid damage to coolant temp switch, do not over-tighten.
00602