TM 1-1740-221-13&P&P
FIELD MAINTENANCE
RADIATIOR SUPPORT ISOLATORS
INITIAL SETUP:
Tools and Special Tools
Equipment Condition
General Mechanic Tool Box (WP 0157, Item 24)
Engine Shut Down and Cool
Personnel Required
91B, Light Wheel Vehicle Mechanic
INSPECTION
Visually inspect radiator support isolators for mount security, dry rot, or deterioration due to oil or coolant
impregnation.
END OF TASK
REMOVAL
Figure 1. RH Radiator Support Isolators (Removal and Installation)
NOTE
There are 3 radiator isolator mounts on the SATS located underneath the radiator.
1.
Remove 2 lower bolts (Figure 1, Item 4) and 2 lat washers (Figure 1, Item 5).
2.
Remove 2 upper nuts and lat washers (not shown).
3.
Pry out 2 radiator support isolators (Figure 1, Item 1).
4.
Remove lower mount bolt and washer (Figure 2).
5.
Remove upper mount nut and washer (not shown).
6.
Pry out radiator support isolator (Figure 2).
END OF TASK
00581