0039
TM 1-1740-221-13&P&P
FLYWHEEL - (CONTINUED)
NOTE
Ensure lywheel and crankshaft mating surfaces are clean and free from oil and other foreign
substances.
1.
Position lywheel (Figure 1, Item 1) on engine.
CAUTION
Do not use an impact wrench when removing the lywheel mounting bolts as damage may
occur to lywheel and/or crankshaft.
NOTE
When installing lywheel mount bolts, hold the engine harmonic balancer crank bolt or engine
may spin.
2.
Install 6 lywheel mount bolts (Figure 1, Item 2). Torque bolts to 72.4 79.5 ft-lb (98.1 107 Nm).
3.
Carefully position torque converter spacer (Figure 1, Item 3) on lywheel.
4.
Install 6 torque converter spacer mount bolts (Figure 1, Item 4).
5.
Install torque Converter (WP 0045).
6.
Install transmission (WP 0043).
7.
Lift engine power pack (WP 0032).
8.
Remove engine power pack maintenance mounts (WP 0032).
9.
Install engine power pack in engine power pack cradle (WP 0032).
10.
Install power pack assembly in the vehicle (WP 0031).
11.
Perform Maintenance Operation Check.
END OF TASK
END OF WORK PACKAGE
00393/blank