TM 1-1740-221-13&P&P
FIELD MAINTENANCE
ENGINE POWER PACK
INITIAL SETUP:
References
Tools and Special Tools
General Mechanic Tool Box (WP 0157, Item 24)
Engine Power Pack Maintenance Mounts
(WP 0157, Item 6)
Engine Power Pack Maintenance Mounts
(WP 0157, Item 4)
Sling 2 Ton (WP 0157, Item 18)
Personnel Required
91B, Light Wheel Vehicle Mechanic (2)
REMOVAL
CAUTION
Stand Weldment, Engine Pack (Illustrated List of Manufactured Items, WP 0141) must
be procured and installed prior to the engine power pack being placed on a level surface
to perform maintenance.
1.
Remove power pack assembly (WP 0031).
2.
Drain transmission oil now if engine/transmission assembly is being separated (WP 0044).
3.
Drain engine oil now if engine is being replaced (WP 0033).
4.
Remove fuel/water separator housing assembly (WP 0065).
5.
Drain and remove hydraulic tank (WP 0131).
NOTE
Bottom right front isolator must be identiied for reinstallation in same location and position.
6.
Remove 4 engine power pack mount nuts, washers, bolts and lower 1/2 of isolators (WP 0040).
00321
