TM 1-1740-221-13&P&P
FIELD MAINTENANCE
TRANSMISSION
INITIAL SETUP:
Personnel Required
Tools and Special Tools
91B, Light Wheel Vehicle Mechanic
General Mechanic Tool Box (WP 0157, Item 24)
Sling (WP 0157, Item 18)
References
Torque Wrench, 0-250 ft-lb (WP 0157, Item 27)
Trans Lift Weldment (WP 0157, Item 30)
Materials/Parts
Sealant, Locktite (WP 0156, Item 38)
INSPECTION
Inspect transmission for security of mounting, damage to the housing and for leaks at hoses, ittings and solenoid
valves. Inspect solenoid wiring for cuts and breaks in the insulation. Inspect all wiring and connectors for security.
END OF TASK
REMOVAL
2
1
5
4
3
WP0035F1
Figure 1. Threaded Rods Park Position
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
NOTE
Note orientation of all LRU s, components, wiring and hoses, tag to aid in reinstallation.
1.
Remove power pack assembly (WP 0031).
2.
Position engine power pack on maintenance mounts (WP 0032).
00431