0039
TM 1-1740-221-13&P&P
FLYWHEEL - (CONTINUED)
1
2
3
4
WP0031F1
Figure 1. Flywheel (Removal and Installation)
1.
Remove power pack assembly (WP 0031).
2.
Remove engine power pack from cradle (WP 0032).
3.
Install 4 engine power pack maintenance mounts (WP 0032).
4.
Lower engine power pack to the loor or work table (WP 0032).
5.
Remove transmission (WP 0043).
6.
Remove torque converter (WP 0045).
7.
Remove 6 torque converter spacer bolts (Figure 1, Item 4) and remove torque converter spacer
(Figure 1, Item 3).
CAUTION
Do not use an impact wrench when removing the lywheel mounting bolts as damage may
occur to lywheel and/or crankshaft.
NOTE
When removing lywheel mount bolts, hold the engine harmonic balancer crank bolt or engine
may spin.
8.
Remove 6 lywheel mount bolts (Figure 1, Item 2).
9.
Remove lywheel (Figure 1, Item 1) from engine.
END OF TASK
INSTALLATION
00392