0015 00
TM 1-1730-223-13&P
REPAIR OR REPLACEMENT
Straighten, weld and repaint as needed.
INSTALLATION
1.
Install rear leg (Figure 4, Item 6) in main frame (Figure 4, Item 12).
2.
Align holes. Insert pivot pin (Figure 4, Item 10) and two lower washers (Figure 4, Item 11) in bracket on main
frame (Figure 4, Item 12).
3.
Secure legs with two cap screws (Figure 4, Item 7), two lock washers (Figure 4, Item 8), and two flat washers
(Figure 4, Item 9) at each leg.
4.
Align holes and insert shoulder screw (Figure 4, Item 4) through step (Figure 4, Item 5), washer (Figure 4,
Item 3), and leg (Figure 4, Item 6) at each of 8 steps.
5.
Secure with washer (Figure 4, Item 2) and self-locking nut (Figure 4, Item 1).
REMOVAL
Figure 5.
Steps.
0015 00-6
