0022 00
TM 1-1730-201-13&P
REMOVAL CONTINUED
6.
Remove the WP 0023 00, Immobilizing Jacks.
7.
Remove the WP 0024 00, Hitch and Tow Tube Assemblies.
8.
Remove the WP 0025 00, Swivel Casters.
9.
Remove the WP 0026 00, Wheel Assembly and Axle.
10. After removing the above assemblies, the base assembly is disassembled as far as possible.
CLEANING
WARNING
CLEANING SOLVENT MIL-PRF-680
Is combustible and toxic to eyes, skin, and respiratory tract. Wear protective gloves and
goggles/face shield. Avoid repeated or prolonged contact. Use only in well ventilated areas
(or use approved respirator as determined by local safety/industrial hygiene personnel). Keep
away from open ames or other sources of ignition.
Wash the base assembly in Cleaning Compound, Solvent.
TEST AND INSPECTION
Inspect all tubular members for cracks or bending. Weld all cracks and straighten any bends of the tubular mem-
bers.
INSTALLATION
Install the WP 0026 00, Wheel Assembly and Axle.
1.
Install the WP 0025 00, Swivel Casters.
2.
Install the WP 0024 00, Hitch and Tow Tube Assemblies.
3.
Install the WP 0023 00, Immobilizing Jacks.
4.
Install the WP 0021 00, Hydraulic Cylinder Assembly.
5.
Install the WP 0018 00, Hydraulic Strainer Assembly.
6.
Install the WP 0017 00, By-Pass Valve Assembly.
7.
Install the WP 0016 00, Hydraulic Hand Pump.
8.
Install the WP 0013 00, Upper Structure Assembly.
9.
END OF WORK PACKAGE
0022 00-2