TM 1-1270-476-30
6-18
6-4. BRAKE RELEASE POWER SUPPLY ASSEMBLY REPAIR (cont)
4. ELECTRONIC COMPONENTS ASSEMBLY
A1 REPLACEMENT
REMOVAL
a. Remove control panel assembly (1 above).
b. Slide insulation sleeving (1) back on two
wires (2).
c. Tag and unsolder two wlres (2) from
terminals of batteries BT1 (3) and BT2 (4).
d. Remove control panel (5) from battery
support studs (6) by removing four screws
(7).
e. Tag and unsolder nine wires (8) leading off
electronic components assembly (9).
f. Remove electronic components assembly
(9) from control panel (5) by removing four
screws (10), spacers (11), washers (12),
and locknuts (13).
