TM 1-1270-476-30
4-255
4-30. HEADS OUT DISPLAY (HOD) ASSEMBLY REPAIR (cont)
b. Disconnect connector A2P1 (3).
c. Remove video output and focus CCA (4) by
loosening captive screw (5).
INSTALLATION
d. Install video output and focus CCA (4) and
tighten captive screw (5).
e. Connect connector A2P1 (3).
f. Install HOD cover assembly (1) and tighten
six captive screws (2).
g. Perform followup.
END OF TASK
