TM 1-1270-476-30
4-156
4-9. BRANCHED WIRING HARNESS ASSEMBLY (W10) REPAIR
This task covers replacement of:
Para
Item
1.
Connector P2
2.
Connector P11 or P12
3.
Connector P13
4.
Connector P15 or P17
Para
Item
5.
Connector P16
6.
Connector J1, P3, or P14
7.
Connector P9 contact
8.
Connector P10 contact
INITIAL SETUP
Tools
Aircraft armament repairman tool set
Hex key (T1, appendix D)
Materials (appendix C)
Corrosion inhibitive sealing and coating
compound (Item 16)
Personnel Required
68J Aircraft Fire Control Repairer
Assistant required for connector W10P13
replacement
CAUTION
While performing this procedure keep all
exposed lens covered with lens paper to
prevent damage to coated optical surfaces.
NOTE
This figure is a phantom view of branched
wiring harness assembly W10 laid over the
night sensor assembly. Only connectors
replaced in this paragraph are called out.
