TM 1-1270-476-30
4-54
4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
INITIAL SETUP
Tools
Aircraft armament repairman tool set
Aircraft armament technical inspector tool set
Materials (appendix C)
Acetone (Item 1)
Noncorrosive RTV adhesive-sealant (Item 2)
Isopropyl alcohol (Item 5)
Artists brush (Item 7)
Pipe cleaner (Item 11)
Sealing, locking and retaining compound (Item
13)
Corrosion inhibitive sealing and coating
compound (Item 15)
Dichloromethane (Item 20)
Fingercots (Item 21)
Heat shrinkable electrical insulation (Item 27)
Insulation sleeving (Item 32)
Lens paper (Item 41)
Primer, sealing compound (Item 45)
Respirator (Item 47)
Solder (Item 48)
Hot air shrinkable conductor splice (Item 49)
Hot air shrinkable conductor splice (Item 51)
Hot air shrinkable conductor splice (Item 52)
Lacing and tying tape (Item 56)
Masking tape (Item 59)
Teflon tape (Item 60)
Insulation tubing (Item 64)
Insulation tubing (Item 65)
Insulation tubing (Item 67)
Wire, electrical, uninsulated AWG-24 (Item 70)
Silicone rubber adhesive (Item 70)
Personnel Required
68J Aircraft Fire Control Repairer
Assistant required for cooler/Dewar
replacement
66J30 Aircraft Armament Technical Inspector
Reference
TM 11-5855-294-12&P
CAUTION
This unit contains electrostatic discharge
sensitive (ESDS) devices. Refer to
paragraph 2-8 for handling requirements
before starting this task, to prevent damage
to the devices.
While performing this procedure keep all
exposed lenses covered with lens paper to
prevent damage to coated optical surfaces.
Use of clean fingercots and respirator is
mandatory when handling optical
assemblies.
