TM 1-1270-476-30
4-56
4-5. NIGHT SENSOR ASSEMBLY (NSA) REPAIR (cont)
INSTALLATION
b. Remove old corrosion inhibitive sealing and
coating compound from screw (5) (para
2-6).
c. Apply corrosion inhibitive sealing and
coating compound to screw (5) (para 2-6).
Use class 1A application.
d. Install preamplifier cover (1).
NOTE
OIP preamplifier cover only uses two washers
(8) for assembly.
(1) Position cover (1) on night sensor
assembly and secure using four socket
head capscrews (9) and washers (10),
two cross-tip machine screws (11), four
washers (8), and two spacers (12).
(2) Connect connector W10P10 (3) to
connector A36J1 (4) and tighten two
screwlocks (2).
(3) Connect connector A36J2 (6) to
connector A32B1P1 (7) and secure
with screw (5).
END OF TASK
