TM 1-1740-221-13&P&P
FIELD MAINTENANCE
THROTTLE MASTER CYLINDER/PEDAL ASSEMBLY
INITIAL SETUP:
Personnel Required
Tools and Special Tools
91B, Light Wheel Vehicle Mechanic (2)
General Mechanics Tool Kit (WP 0157, Item 24)
Drip Pan (WP 0155, Item 26)
References
Wheel Chocks (WP 0155, Item 25)
Materials/Parts
Anti-Seize Tape (WP 0156, Item 49)
Equipment Condition
Cloth, Lint-Free (WP 0156, Item 31)
Engine Shut Down
Fluid, Hydraulic (WP 0156, Item 18)
INSPECTION
Inspect throttle master cylinder and pedal assembly for mount security, hose connection and rod end for leakage or
any damage affecting serviceability.
Figure 1. Throttle Master Cylinder/Pedal Assembly (Removal and Installation)
END OF TASK
REMOVAL
THROTTLE MASTER CYLINDER
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
01261