0086
TM 1-1740-221-13&P&P
PARK POSITION BRAKE LIMIT SWITCHES - (CONTINUED)
LOWER LIMIT SWITCH
NOTE
Remove cover from new switch assembly.
1.
Install strain relief plug (Figure 3, Item 8).
2.
Push 2 wires (Figure 3, Item 3) into switch assembly.
3.
Loosen 2 wire mount screws (Figure 3, Item 4).
4.
Install 2 wires (Figure 3, Item 3).
5.
Tighten 2 wire mount screws (Figure 3, Item 4).
6.
Install 2 cover mount screws (Figure 3, Item 9).
7.
Position switch assembly (Figure 3, Item 2).
8.
Install 2 mount bolts (Figure 3, Item 10) and nuts.
NOTE
Install spring arm assembly at the 9:00 o-clock position.
9.
Install spring arm assembly (Figure 3, Item 11) on actuator shaft.
10.
Tighten spring arm mount bolt (Figure 3, Item 1).
11.
Connect battery negative cables (WP 0111).
12.
Perform Maintenance Operation Check.
13.
Install center deck plate (WP 0028).
END OF TASK
END OF WORK PACKAGE
00865/blank