0086
TM 1-1740-221-13&P&P
PARK POSITION BRAKE LIMIT SWITCHES - (CONTINUED)
2
1
3
WP0077F1
Figure 1. Upper Limit Switch Guard
END OF TASK
REMOVAL
UPPER LIMIT SWITCH
1. Disconnect battery negative cables (WP 0111).
2. Remove center deck plate (WP 0028).
3. Remove two screws (Figure 1, Item 1).
4. Remove limit switch guard (Figure 1, Item 2).
NOTE
Tag limit switch wires to aid with reinstallation. Wire # 63 is connected to the normally closed
contact and wire # 62 is connected to the common contact.
5.
Remove two screws (Figure 2, Item 2).
6.
Remove wiring lead # 62 (Figure 2, Item 5) and # 63 (Figure 2, Item 3) from limit switch.
7.
Remove two screws (Figure 2, Item 4), washers (Figure 2, Item 1) and lock nuts (Figure 2, Item 7).
8.
Remove limit switch (Figure 2, Item 6).
00862