TM 1-1740-221-13&P&P
FIELD MAINTENANCE
FUEL INJECTION PUMP
INITIAL SETUP:
Tools and Special Tools
Gear Puller (WP 0157, Item 10)
General Mechanic Tool Box (WP 0157, Item 24)
Torque Wrench, 0-10 ft-lb (WP 0157, Item 26)
Equipment Condition
Engine Shut Down and Cool
Personnel Required
91B, Light Wheel Vehicle Mechanic (2)
References
INSPECTION
Visually inspect fuel injection pump for mount security, fuel lines for leaks, cracks, or wear and for any damage
affecting serviceability.
Figure 1. Coolant Bottle Mount Bracket
END OF TASK
REMOVAL
1. Disconnect negative battery cables (WP 0111).
2. Open engine cover (WP 0028).
3. Disconnect overlow hose from overlow bottle (WP 0059).
4. Remove bracket mount bolts (Figure 1, Item 1).
5. Remove bracket (Figure 1, Item 2).
6. Remove 4 fuel injection pump fuel lines (WP 0069).
7. Remove mechanical fuel pump output fuel line (WP 0067).
00681