0067
TM 1-1740-221-13&P&P
FUEL PUMP (MECHANICAL) - (CONTINUED)
INSTALLATION
1. Clean fuel pump mating surface.
2. Position fuel pump gasket (Figure 1, Item 7).
3. Position fuel pump (Figure 1, Item 5).
4. Install two mount nuts (Figure 1, Item 6) (one nut not shown). Tighten nuts to 8 ft-lb (1.23 Nm).
5. Install input fuel line hose (Figure 1, Item 4).
6. Install output fuel line hose (Figure 1, Item 2).
7. Tighten hose clamp (Figure 1, Item 1).
8. Tighten hose clamp (Figure 1, Item 3).
9. Bleed air from fuel system (WP 0065).
10. Connect battery negative cables (WP 0111).
11. Perform Maintenance Operation Check.
12. Close engine access cover (WP 0028).
END OF TASK
END OF WORK PACKAGE
00673/blank