0068
TM 1-1740-221-13&P&P
FUEL INJECTION PUMP - (CONTINUED)
12. Remove 3 bolts (Figure 5, Item 2) (2 not shown) and 3 nuts (Figure 5, Item 1) (2 not shown).
13. Remove injection pump assembly (Figure 5, Item 3).
14. Remove injection pump gasket (Figure 5, Item 4).
END OF TASK
INSTALLATION
1. Install injection pump gasket (Figure 5, Item 4).
2. Install injection pump assembly (Figure 5, Item 3).
3. Install 3 bolts (Figure 5, Item 2) and 3 nuts (Figure 5, Item 1).
NOTE
Install fuel return hose and air bleed hose onto pump assembly at this point.
4.
Slide governor connecting rod (Figure 4, Item 1) onto the rack pin of the injection pump assembly.
00684