0057
TM 1-1740-221-13&P&P
UPPER AND LOWER RADIATOR HOSES - (CONTINUED)
Figure 2. Lower Radiator Hose (Removal and Installation)
WARNING
The use of Personal Protective Equipment (PPE) is required when using or handling hazardous
materials associated with operating and maintaining equipment (jet fuel, hydraulic luid, brake
luid, ethylene glycol, cleaning solvents, compressed air, and engine/axle oil). Failure to use
PPE when handling these materials could result in injury or death.
NOTE
Drain radiator level below the thermostat for removal of upper hose and completely for removal
of the lower hose.
Lower radiator hose clamp on lower hose is accessed through right front wheel housing.
1.
Open engine cover (WP 0028).
2.
Lift front of SATS vehicle (WP 0029).
3.
Remove right front wheel assembly (WP 0092).
4.
Drain radiator (WP 0053).
5.
Loosen two hose clamps (Figure 1, Item 1) and remove upper radiator hose (Figure 1, Item 3).
6.
Loosen two hose clamps (Figure 2, Item 1) and remove lower radiator hose (Figure 2, Item 3).
END OF TASK
00572