0024 00
TM 1-1730-227-13&P
SERVICE
TIRE ROTATION
Figure 2.
Tire Rotation.
NOTE
Tires to be rotated will be installed on rims, meet proper inflation pressures, and be mounted on
the maintenance trailer.
1.
Position trailer on a hard level surface.
2.
Raise trailer so that the wheels clear the ground and support the trailer in the raised position.
3.
Remove five nuts with washers (Figure 1, Item 3) securing each wheel assembly to the hub (Figure 1, Item
2). Remove the wheel assemblies (Figure 1, Item 1) from their hubs (Figure 1, Item 2).
4.
Reposition each wheel assembly to its new location per Figure 2.
5.
Position the wheel assemblies (Figure 1, Item 1) on their hubs (Figure 1, Item 2) at their new locations.
6.
Install five nuts with washers (Figure 1, Item 3) securing each wheel assembly (Figure 1, Item 1) to the hub
(Figure 1, Item 2). Tighten nuts with washers (Figure 1, Item 3) to a torque of 540 in-lbs.
7.
Lower trailer to the ground.
REMOVAL
Removal of the tire and tube is to be done in accordance with FM 1-563.
INSTALLATION
Installation of the tire and tube is to be done in accordance with FM 1-563.
END OF WORK PACKAGE
0024 00-2