0022 00
TM 1-1730-227-13&P
SERVICE
Lubricate the bearings located in the left and right-hand axle and king pin pivot assemblies (Figure 1, Item 1 and 2 ).
There are grease fittings provided for this task.
REPAIR OR REPLACEMENT
1.
Welding. Welding to repair cracks is to be done in accordance with FM 1-563.
2.
Use the appropriate hand file contained in the tool kit to remove burrs and sharp edges from rear axle or axle
and king pin pivot assembly.
3.
Replace missing, damaged, bent or distorted parts.
REMOVAL
Figure 2.
LH and RH Axle and King Pin Pivot Assemblies Exploded View.
LEFT OR RIGHT-HAND
1.
Remove two spring pins (Figure 2, Item 5 and 7 ) from the king pin (Figure 2, Item 1 and 2 ).
2.
Remove king pins (Figure 2, Item 1 and 2 ) securing the axle and king pin pivot assemblies (Figure 2, Item
4 and 6 ) to the king pin support assemblies (Figure 2, Item 3 and 8 ). Remove the axle and king pin pivot
assemblies (Figure 2, Item 4 and 6 ).
INSTALLATION
LEFT OR RIGHT-HAND
1.
Position axle and king pin pivot assemblies (Figure 2, Item 4 and 6 ) on the king pin support assemblies
(Figure 2, Item 3 and 8 ).
2.
Align holes and install king pins (Figure 2, Item 1 and 2 ) through the king pin support assemblies (Figure 2,
Item 3 and 8 ) and the axle and king pin pivot assemblies (Figure 2, Item 4 and 6 ).
3.
Install two spring pins (Figure 2, Item 5 and 7 ) through the holes on the king pin support assemblies (Figure
2, Item 3 and 8 ) and king pins (Figure 2, Item 1 and 2 ).
0022 00-2
