TM 1-1730-213-13&P
FIELD MAINTENANCE
JACK, HYDRAULIC, TRIPOD, 12TON FIXED-HEIGHT
PART NO. 1214-151 NSN 1730-00-554-5436 NSN 1730-00-554-5436
LUBRICATION
INITIAL SETUP:
Materials/Parts
References
Degreasing Solvent, MIL-PRF-680
(WP 0025 00, Item 2)
LUBRICATION
CARE OF LUBRICANTS
Replace covers on lubricant containers after use and store in a clean, dry place. Keep all containers used for han-
dling oil and luid clean and ready for use.
CLEANING
WARNING
Item Degreasing Solvent, MIL-PRF-680 is combustible and toxic to eyes, skin, and respiratory
tract. Wear protective gloves and goggles/face shield. Avoid repeated or prolonged contact.
Use only in well-ventilated areas (or use approved respirator as determined by local safety/in-
dustrial hygiene personnel). Keep away from open lames or other sources of ignition.
Clean all lubrication ittings or points of application with a cloth dampened in Degreasing Solvent, MIL-PRF-6800)
before applying lubricant.
Table 1.
Lubrication Chart.
Expected Temperature
Intervals
Above +32
+32 F to
-10 to -65 F
F
-10 F
MIL-H-
MIL-H-5606
MIL-H-5606
OH-HYDRAULIC FLUID, Hydraulic
5606
500 hrs.
Cylinder and
Pump Assembly
OE-OIL, Engine,
All temperatures
Monthly
Extension screw
Caster Wheels
GREASE,
All temperatures
Monthly
MIL-G-10924
Caster leg
POINTS OF APPLICATION
1.
Clean extension screw (WP 0004 00, Figure 1, Item 15) and ram (WP 0004 00, Figure 1, Item 17) thoroughly
and apply lubricating oil as directed in the lubrication chart (Table 1).
0012 00-1