TM 1-1730-213-13&P
OPERATOR MAINTENANCE
JACK, HYDRAULIC, TRIPOD, 12-TON FIXED-HEIGHT
PART NO. 1214-151 NSN 1730-00-554-5436 NSN 1730-00-554-5436
SERVICE UPON RECEIPT OF MATERIAL
INITIAL SETUP:
References
Materials/Parts
Degreasing Solvent, MIL-PRF-680
(WP 0025 00, Item 2)
Hydraulic Fluid (WP 0025 00, Item 4)
SERVICE UPON RECEIPT OF MATERIEL
UNPACKING
CAUTION
Exercise care in removal of the crate top to prevent damaging the equipment with the prying
tool.
1.
Pry the top from the crate s sides and remove the jack and allied parts from the crate.
WARNING
Degreasing Solvent, MIL-PRF-680 is combustible and toxic to eyes, skin, and respiratory tract.
Wear protective gloves and goggles/face shield. Avoid repeated or prolonged contact. Use
only in well-ventilated areas (or use approved respirator as determined by local safety/industrial
hygiene personnel). Keep away from open lames or other sources of ignition.
2.
Remove the pressure-sensitive tape from all sealed openings. Remove preservatives from all unpainted
metal surfaces with Degreasing Solvent, MIL-PRF-680
PRELIMINARY CHECKS AND ADJUSTMENTS
INSPECT NEW EQUIPMENT
1.
Perform the before-operation services (WP 0011 00).
2.
Make a thorough visual inspection of the equipment for cracks, breaks, distortion, and loose or missing parts.
3.
Inspect all parts and assemblies for correct and secure mountings.
4.
Correct all deiciencies or report them to the proper authority.
INSPECT USED EQUIPMENT
1.
Inspect used tripod hydraulic jack (WP 0011 00). Pay particular attention to the components which may
be worn, such as the extension screw (WP 0004 00, Figure 1, Item 15) and leg and caster assembly
(WP 0004 00, Figure 2, Item 2).
2.
Correct or report all deiciencies to proper authority.
0009 00-1