TM 1-1730-213-13&P
0013 00
REPAIR OR REPLACEMENT
1.
Replace weak or damaged springs.
2.
Retouch or repaint all painted surfaces as required. Restore unpainted surfaces with Lubrite.
ASSEMBLY
1.
Bolt caster (Figure 2, Item 1) to shaft (Figure 2, Item 5).
2.
Lubricate the shaft and inside of tube withGrease.
3.
Place spring (Figure 2, Item 7) over shaft and assemble into tube.
4.
Compress spring and install retaining ring (Figure 2, Item 6) on shaft.
INSPECTION OF INSTALLED ITEMS
1.
Check painted surfaces for deterioration.
2.
Tubes for bending.
3.
Shaft for scoring on rubbing surfaces and damaged threads.
4.
Caster for lat spots on wheel or damaged swivel bearings.
5.
Springs for weakness.
END OF WORK PACKAGE
0013 00-3/4 blank