TM 1-1730-201-13&P
FIELD MAINTENANCE
MAINTENANCE PLATFORM, TYPE B-1
PART NO. 50-19080 NSN 1730-00-390-5618 EIC: NA
PREVENTATIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
INITIAL SETUP:
References (cont.)
References
Table 1. Operator's Daily Services.
ITEM INTERVAL MAN- ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
HOUR CHECKED OR
NOT READY/
SERVICED
AVAILABLE IF:
Visual inspection -- An external inspection will
1
Before,
be made to determine whether themaintenance
During,
platformis in good condition, correctly assembled,
After
and secure. Anymechanical condition which may
result in damages to the unit must be corrected
before the equipment is operated.
Leaks--Inspect the hydraulic lines and ttings for
2
Before,
leakage.
During,
After
Before,
Hydraulic Fluid--Inspect the uid level; add uid, if
3
necessary, to bring level up to one inch below the
After
ller neck.
4
Before
Tampering--Inspect the maintenance platform for
evidence of tampering or damage. Do not operate
the unit until all defects are corrected or reported to
organizational maintenance.
Table 2. Preventative Maintenance Checks and Services (PMCS).
ITEM INTERVAL MAN- ITEM TO BE
PROCEDURE
EQUIPMENT
NO.
HOUR CHECKED OR
NOT READY/
SERVICED
AVAILABLE IF:
1
M
Maintenance
Before operation services. Inspect and perform the
Platform
operators daily services.
2
M
Lubrication
Check maintenance platform for damaged or
missing lubrication ttings. Inspect to see that a
copy of the current lubrication order is with the unit
and in legible condition.
0011 00-1
