TM 1-1270-476-304-64-2. TADS TURRET ASSEMBLY REPLACEMENT (cont)i. Disconnect the following connectors:P871 (8) from W1J1 (9)P870 (10) from W1J2 (11)P869 (12) from W3J3 (13)P868 (14) from W3J4 (15)j. Remove ORT cable cover (TM 1-1270-476-20).CAUTIONOptics are exposed during this task. When optics are exposed for more than 5 minutes they must be protected from contamination. Careless handling of equipment could result in contaminated or damaged optics.NOTE• The AND does not have to be removed if there is a cable guide attached to the AND and the cables on both sides of the ORT are retained by the cable guide.• The AND does not have to be removed if there is no cable guide, but the cables on both sides of the ORT are free of the instrument panel.• The AND must be removed if the cables on either side of the ORT are retained or wedged by the instrument panel.• Go to step k below if AND does not have to be removed from ORT.k. Remove AND assembly (TM 1-1270-476-20).NOTETo gain access to left side swivel-foot screw, the left instrument panel flood light lens and lamp must be removed.l. Remove left instrument panel flood light lens and lamp (TM 1-1520-238-23).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business