TM 1-1270-476-30
4-328
4-38. HARNESS ASSEMBLY REPAIR (cont)
8. CONNECTOR P8 REPLACEMENT
REMOVAL
a. Remove rear assembly (para 4-37).
b. Disconnect connector cover P8 (1) by
loosening two screwlocks (2).
c. Remove connector P8 (1) from wiring
harness (para 2-5).
INSTALLATION
d. Install replacement connector P8 (1) on
wiring harness (para 2-5).
e. Connect connector P8 (1) and tighten two
screwlocks (2).
f. Install rear assembly cover (para 4-37).
END OF TASK
