TM 1-1270-476-30
4-326
4-38. HARNESS ASSEMBLY REPAIR (cont)
6. CONNECTOR J5 REPLACEMENT
REMOVAL
a. Remove CCA A14 (para 4-37).
b. Disconnect connector P5 (1) from
connector J5 (2) by loosening two
screwlocks (3).
c. Remove connector J5 (2) from bracket (4)
by removing two screws (5) and washers
(6).
NOTE
Move connector J5 into forward compartment
for easier access.
d. Remove connector J5 (2) from wiring
harness (para 2-5).
INSTALLATION
e. Install connector J5 (2) on wiring harness
(para 2-5).
f. Install connector J5 (2) on bracket (4) using
two screws (5) and washers (6).
g. Connect connector J5 (2) to connector P5
(1) and tighten two screwlocks (3).
h. Install CCA A14 (para 4-37).
END OF TASK