TM 1-1270-476-30
4-263
4-31. HOD HARNESS ASSEMBLY REPAIR (cont)
CAUTION
Use care when handling harness assembly.
Careless handling may damage electrical
wiring and/or connector assemblies.
g. Remove connector plate assembly (19) by
removing six screws (20) and washers (21).
h. Pull connector plate assembly (19) with
attached HOD harness assembly (22) clear
of HOD housing.
INSTALLATION
NOTE
Elapsed time indicator ETI may not be part of
HOD harness assembly. This is acceptable
since ETI is being eliminated.
i.
Position HOD harness assembly in housing
and route connectors to mounting
locations.
j.
Install connector plate assembly (19) with
six screws (20) and washers (21).
