TM 1-1270-476-30
4-265
4-31. HOD HARNESS ASSEMBLY REPAIR (cont)
p. Install connector J3 (4) by tightening two
captive screws (6).
q. Install connector J4 (5) by tightening two
captive screws (7).
r. Install terminal board assembly TB1 (1)
with two screws (2) and washers (3).
s. Install yoke assembly (para 4-30).
t. Perform followup.
END OF TASK
2. CONNECTOR J2 CONTACT REPLACEMENT
REMOVAL
a. Remove air vent assembly (1) by removing
six screws (2) and washers (3).
b. Disconnect connector P1 (4).
