TM 1-1270-476-30
4-264
4-31. HOD HARNESS ASSEMBLY REPAIR (cont)
k. Install connector A1J1 (13) with two screws
(14) and washers (15).
l.
Install connector A2J1 (16) with two screws
(17) and washers (18).
NOTE
If elapsed time indicator ETI is attached to
HOD harness assembly, and a hole is located
in chassis assembly, perform step m. If ETI is
not attached to HOD harness assembly,
perform step n. If ETI is attached to HOD
harness assembly and a hole is not located in
chassis assembly, perform step o.
m. Install elapsed time Indicator ETI (8) with
two screws (12), spacers (11), washers
(10), and locknuts (9). Proceed to step q.
n. Install cover (23) using two screws (12),
spacers (11), washers (10), and locknuts
(9). Proceed to step p.
o. Remove ETI (para 4-30).