TM 1-1270-476-30
4-229
4-29. CONTROL PANEL ASSEMBLY 2A1 REPAIR (cont)
CAUTION
Use care when handling HOD assembly.
Careless handling may damage control panel
components.
c. Hold HOD assembly (7) with one hand and
remove four screws (8) and washers (9).
d. Remove HOD assembly (7) from control
panel housing (10).
INSTALLATION
e. Remove old corrosion inhibitive sealing and
coating compound from mounting hardware
(para 2-6).
f. Apply corrosion inhibitive sealing and
coating compound to four screws (6) (para
2-6). Use class 1A application.
NOTE
The two longest screws are used in the front
HOD mounting holes.
g. Install HOD assembly (7) in control panel
housing (10) with four screws (8) and
washers (9). Ensure that HOD assembly is
seated fully forward before tightening
screws (8).
